KW950E was able to fulfill this requirement. During the interface of C-plath nmea Gyro signal to Sperry marine VMFT radar, we used KW950E to connect input with 4800bps and ouput 38400bps to both radar and both ECDIS.Be very careful, only one setting works with KW950E from NMEA 4800bps to 38400bps. Below were the procedures :
1. Connect 24Vdc into SK1 of KW950E
2. Connect 4800bps $HEHDT into SK5 data input no.2 - A and B
3. Connect data output into SK3 output no.1 - A and B
4. Set SW1 to 0001 1110 for 4800 input, 38400 output and HEHDT
5. Switch on power and you will get to see display blinking, press either increase or decrease to acknowledge the presence of signal input.
Setup completed. Please see attached pictures to see the connection details.
