Kelvin Hughes MDP-A5 SVDR DAU convert to MDD Radar for testing Saab R4 AIS interface purpose.

Try to load MDD software into VDR system. Start up and found No MTI and system show slave mode. Connect AIS signal and was able to show on screen.

Then swap the Manta vdr interface pcb FSD-A202 with Manta Radar interface pcb FSD-A223, system detected this pcb and change from No MTI to Tx2. Run simulate mode, it shows very good simulated echo with real AIS targets on screen.

Sperry tabletop ecdis vmft convert to Radar vmft V2.0.5.850

Previously use as vmft ecdis.

Now it can be use as a standalone radar connected as interswitch to other radar. As the specification of the motherboard is relatively low, run the most early software and connect to BME X-band. 3-4Arcs can be shown on display transmit with PM at 12 nm.